<![CDATA[Modbus TCP]]>https://forum.rexygen.com/category/9RSS for NodeSat, 18 Apr 2026 19:15:36 GMTMon, 12 Feb 2024 12:40:23 GMT60<![CDATA[asci conversion]]>@MikeyH Hi Mike,

I'm glad it works for you 😉

For the "variable decimal point" I would use blocks MUL and CNDR. CNDR configure so it reflects the changing of the gain according to the value.

You will probably find many other solutions which will lead you to the desired behaviour (e.g. SSW for switching gain according to the value)

Hope it helps.

Cheers,
Tomas

]]>https://forum.rexygen.com/topic/551/asci-conversionhttps://forum.rexygen.com/topic/551/asci-conversionFri, 09 Feb 2024 01:06:19 GMT<![CDATA[Modbus TCP getting Error -309]]>@apollo Yes, you are right about the indexing. Starting with upcoming REXYGEN release the error message will contain Slave Name and its IP address for better understanding.

Cheers,
Tomas

]]>https://forum.rexygen.com/topic/224/modbus-tcp-getting-error-309https://forum.rexygen.com/topic/224/modbus-tcp-getting-error-309Tue, 02 Mar 2021 20:06:04 GMT<![CDATA[Use of the 'MTM__SlaveStation_Connected' signal.]]>@cechurat said in Use of the 'MTM__SlaveStation_Connected' signal.:

Status shows time to next reconnect in ms

]]>https://forum.rexygen.com/topic/211/use-of-the-mtm__slavestation_connected-signalhttps://forum.rexygen.com/topic/211/use-of-the-mtm__slavestation_connected-signalTue, 02 Feb 2021 10:00:16 GMT<![CDATA[Writing once a single value to a register]]>Hi Scoobsalamander,

glad I could help. You are right, I didn't take to count the timing. Good luck with your project!

Cheers, Tomas

]]>https://forum.rexygen.com/topic/41/writing-once-a-single-value-to-a-registerhttps://forum.rexygen.com/topic/41/writing-once-a-single-value-to-a-registerSun, 09 Jun 2019 18:30:07 GMT<![CDATA[Raspberry Pi and Click PLC, Modbus TCP]]>Hello folks,

I just wanted to confirm that reducing the "Max. requests" number to 1 allows multiple Modbus reads of the Click PLC.
I agree that reading registers in groups of 4 or 8 is more elegant and will try that next.

Cheers,
Tom Sisk

]]>https://forum.rexygen.com/topic/15/raspberry-pi-and-click-plc-modbus-tcphttps://forum.rexygen.com/topic/15/raspberry-pi-and-click-plc-modbus-tcpFri, 22 Mar 2019 09:47:35 GMT<![CDATA[Integration of Advantech modules and systems (ADAM 5000 and 6000 series)]]>The following the link to a topic in our old forum deals with integration of Advantech ADAM 5000 and 6000 series with REXYGEN using Modbus TCP. The post was written by our user Michal Krupička - thank you again for sharing your know-how!

https://www.rexcontrols.com/forum/viewtopic.php?pid=1523#p1523

]]>https://forum.rexygen.com/topic/9/integration-of-advantech-modules-and-systems-adam-5000-and-6000-serieshttps://forum.rexygen.com/topic/9/integration-of-advantech-modules-and-systems-adam-5000-and-6000-seriesMon, 25 Feb 2019 14:39:09 GMT