GeorgeDumitru last edited by
Does any of you how to use a single input pox in the WebBuDi to set the pt for 3 different timers? I tried to look it up in the manuals but i couldn't find anything. does any of you have any idea if it is at least possible?
cechurat last edited by
thank you for this question.
In general the described behaviour is possible. Connection between HMI and signal in REXYGEN is always one-by-one. You have to introduce subsystem with mask and change the mask parameter via HMI, where the connection string will be as follows:
The masked parameter can be used on as many places as desired within the specified subsystem.
For more information on defining the subsystem mask see:
If you need additional information, let me know.