So I solved it with the AVG block, but I had to play with the tick settings of the whole algorithm, the number of samples and the range of fluctuating values over time.

Hello I have a problem with analog temperature measurement. The value fluctuates too much, see image Tmp.png. How to stabilize this value?
Thank you Michal

Hello.
Is it possible to read the eBUS?
Michal

@reitinge
I use REXYGEN 2.50.10.12481.
I have already tried it in the AI1 input and the result is the same. I assume that the jumpers have no effect on the analog input.
Michal

Hello.
What could be wrong?
If I connect 9V to terminals A2I+ and A2I-, there is no value on the UNP__AI2 flag.

Thank You

@reitinge said in formát času hmi Display:

text_format hh:mm:ss

OK Děkuji.

Dobrý den.
Pokud chci zobrazit časový údaj např. z Timeru v (s) na webu, tak na Display, pokud zadám formát time se mi zobrazí čas s přidanou jednou hodinou např. čas 98s se mi zobrazí jako 1:01:38 místo 00:01:38.
Co s tím?
Díky za opověď
Michal Pancíř