REX.HMI.WebBuDi



  • Hi everybody,

    Does any of you how to use a single input pox in the WebBuDi to set the pt for 3 different timers? I tried to look it up in the manuals but i couldn't find anything. does any of you have any idea if it is at least possible?


  • administrators

    Hi George,

    thank you for this question.
    In general the described behaviour is possible. Connection between HMI and signal in REXYGEN is always one-by-one. You have to introduce subsystem with mask and change the mask parameter via HMI, where the connection string will be as follows:

    "taskName.SubsystemName:maskParameterName"
    

    The masked parameter can be used on as many places as desired within the specified subsystem.

    For more information on defining the subsystem mask see:
    https://www.rexygen.com/doc/ENGLISH/MANUALS/RexygenStudio/RexygenStudio_ENG.html#x1-340004.2

    If you need additional information, let me know.

    Regards, Tomas