ASCII Commands Over RS485

[GeorgeDumitru]

@jan-reitinger Hi Jan, the write is successful but the read doesn't return anything. This is where I always have issues. For some reason the read almost always misses the replay from the device.

[Jan Reitinger]

@georgedumitru Hello George,

Would you mind sharing the part of the project related to communication with the controller? If you prefer to keep it private, please feel free to send it to support@rexcontrols.com.

Thank you!

[GeorgeDumitru]

@jan-reitinger Hi Jan, here is the code of the entire block:

#define COM_BAUDRATE 9600 //baudrate, e.g. 9600, 19200, 57600, 115200
#define COM_PARITY_NONE 0 //no parity
#define COM_PARITY_ODD  1  //odd parity
#define COM_PARITY_EVEN 2  //even parity

#define BUFFER_SIZE 20 // MAXIMUM NUMBER OF BYTES TO SEND
#define COMMAND_LENGTH_MAX 20 //maximum length of command

//Assigning parameters to variables, these variables are read-only;
string parameter(0) serialdevice;//serial device is defined by parameter p0 of the REXLANG Block (e.g. /dev/ttyS0 in Linux or COM1 in Windows)

//Assigning inputs to variables
bool input(0) IsGreenButtonSignalOn;
bool input(1) IsRedButtonSignalOn;
bool input(2) IsYellowButtonSignalOn;
bool input(3) IsProcedureStandardSignal;

//Assigning Variables to Outputs, these variables are WRITE-Only
bool output(0) IsDeviceReady;
bool output(1) IsDeviceInError;
bool output(2) IsDeviceRunning;
string output(3) ResponseFromDMX;
long output(14) DebugMessage;
long output(15) ConnectionStatus;

//Variables Declaration
const long cr = 13; 	  // (cr) is the termination character, carrige return (0Dh);
long hCom, s, receive;	  // Communication Handle
long buffer[BUFFER_SIZE]; // buffer for incoming data
long dataCount; 		  // Number of bytes sent
bool read = true;
string data[BUFFER_SIZE+1];
int status=0;
long a;

void HomeMotor(void){
	long readData[6];
	readData[0]='L';
	readData[1]='H';
	readData[2]='O';
	readData[3]='M';
	readData[4]='E';
	readData[5]='-';
	s=Send(hCom,readData,6);
	return;
}


void ClearError(void){
	a=Write(hCom,"@DMK01EO=1[CR]");
	if(a>0){
		DebugMessage=a;
	}
	else{
		DebugMessage=-1;
	}
}
void MoveTo1000(void){
	a=Write(hCom,"@01J+");
	if(a>0){
		DebugMessage=a;
		status=0;
	}
	else{
		DebugMessage=-1;
	}
}

//the init procedure is executed once when the REXLANG function block initializes
long init(void)
{
	/* PUT YOUR CODE HERE */
	hCom=-1;
	

	
	return 0;
}

//the main procedure is executed repeatedly (once in each sampling period)
long main(void)
{
	/* PUT YOUR CODE HERE */
	if(hCom<0)
	{
		hCom = OpenCom(serialdevice,COM_BAUDRATE,COM_PARITY_NONE); //Opening Serial Device
		ConnectionStatus=hCom;
	}	
	switch(status)
	{
		case 0:
			a=Write(hCom,"@00EO[CR]");
			if(a>0){
				status=1;
			}
			break;
		case 1:
			dataCount = Read(hCom, data,BUFFER_SIZE);
			if(dataCount>0){
				if(data=="1"){
					ResponseFromDMX="ON";
				}
				else{
					ResponseFromDMX="OFF";
				}
				status = 0;
			}
		default:
			break;

	}

	return 0;
}

//the exit procedure is executed once when the task is correctly terminated
// (system shutdown, downloading new control algorithm, etc.)
long exit(void)
{
	/* PUT YOUR CODE HERE */
	if(hCom>=0){
		Close(hCom);
	}
	return 0;
}

[Jan Reitinger]

@georgedumitru, I believe there's a mistake in the Write command. Instead of using the [CR], it should be the ASCII symbol "\r". My apologies for not thoroughly reading the controller manual. Furthermore, I'm considering putting the switch into an else statement:

long main(void)
{
	/* PUT YOUR CODE HERE */
	if(hCom<0)
	{
		hCom = OpenCom(serialdevice,COM_BAUDRATE,COM_PARITY_NONE); //Opening Serial Device
		ConnectionStatus=hCom;
	}
	else
	{	
		switch(status)
		{
			case 0:
				a=Write(hCom,"@00EO\r");
				if(a>0){
					status=1;
				}
				break;
			case 1:
				dataCount = Read(hCom, data,BUFFER_SIZE);
				if(dataCount>0){
					if(data=="1"){
						ResponseFromDMX="ON";
					}
					else{
						ResponseFromDMX="OFF";
					}
					status = 0;
				}
			default:
				break;

		}
	}

	return 0;
}

[GeorgeDumitru]

@jan-reitinger Hi Jan, sorry if I'm being difficult here, but I am just curious, I am receiving a string in the return message. How can i process that to have the string in the output of the block? I managed to get a response from the device, and as long as the response is a single byte, that works just fine, but I am struggling to get a string out of the buffer. Do you have any suggestions?

[Jan Reitinger]

@georgedumitru Hi George,
if you only need a control statement in the log, use Trace(1,data). If you want the string to output directly, this should work:

...
string output(3) outputstring;
...
outputstring = data;

Cheers,
Jan

[GeorgeDumitru]

@jan-reitinger said in ASCII Commands Over RS485:

trol statement in the log, use Trace(1,data). If you want the string to output directly, this should work:

That's what I thought, but every time I try to do that I get this as an error:

[Jan Reitinger]

@georgedumitru Could you post line 111 here or ideally the whole code again?

This minimal example works for me:

#define BUFFER_SIZE 20

string output(1) outputstring;

string data[BUFFER_SIZE+1];

long init(void)
{
	data = "hello there";
	return 0;
}

long main(void)
{
	Trace(1,data);
	outputstring = data;
	return 0;
}

long exit(void)
{
	return 0;
}

[GeorgeDumitru]

Can you please help me with a conversion? I need to interrogate the position of the stepper motor, they have an ascii command I can send to do that, but the response is a 28-bit number. Can you tell me what I can use to get that number from the buffer?

[Jan Reitinger]

@georgedumitru Hi,
When we refer to a 28-bit number, does this imply that the number is transmitted within 4 bytes? If that's the case, and the number is in floating-point format, you should use double buf2double(buf[,endian]) REXLANG function.

[GeorgeDumitru]

@jan-reitinger said in ASCII Commands Over RS485:

buf2double

Hi, the number is not in floating-point format, is actually an int. But what I don't understand is how to use your function What exactly does it take in the argument. I never seen a function taking anything like yours and if I call just double myDouble = buf2double(myBuffer) I expect 100.000 and I get -7.403 669 410 330E-171 . So, how exacttly do i solve this?

[Jan Reitinger]

@georgedumitru
Hello George,

It's challenging to give advice remotely when I can't see what's happening. The data might be in a different format than expected. Could you use Trace() to print the contents of the buffer and share it here?

[GeorgeDumitru]

@jan-reitinger can you direct me to some documentation that shows how to actually use Trace() as I could definitely use that for myself too.

[Jan Reitinger]

@georgedumitru I think the best documentation is this thread here on the forum. Byte array reading from communication is also discussed there.

Another helpful tool is definitely the example located at C:\Program Files\REX Controls\REXYGEN 2.50.12.14711\Examples\0203_Function_Blocks_REXLANG.