Accelerometer
-
Hi All,
I was wonder if the digital inputs of the Monarco will work with this accelerometer. The outputs from it are only 0-3.3V. I'm fairly sure it's ok, just checking!
https://www.adafruit.com/product/163
Cheers
Mike
-
@mikeyh Did you mean analog inputs? The accelerometer outputs range from 0 to 3.3V... In general, it will work. Note that you'll not fully use the resolution of the A/D converter on the Monarco HAT and you'll be limited to 2 axes as the Monarco HAT has 2 analog inputs.
If you meant digital inputs indeed, then it won't work. Logic high voltage of the DIs on the Monarco HAT is 3.5 V to 30 V.
Hope this helps, let me know.
Jaroslav
-
This post is deleted! -
Hi Mike,
The Monarco's digital inputs should be compatible with the accelerometer's 0-3.3V outputs. Just ensure proper voltage levels alignment and consider any additional signal conditioning if needed. If you have specific technical details, consulting the Monarco documentation or reaching out to their support could provide more precise guidance.
Cheers!