@cechurat said in HMI Warnings after migration from Version 2.50.9 to 2.50.10:
support(at)rexygen.com
Hi Tomas,
Thank you for your support.
I have send my project per mail as Zip Archive.
Best regards,
Günther
@cechurat said in HMI Warnings after migration from Version 2.50.9 to 2.50.10:
support(at)rexygen.com
Hi Tomas,
Thank you for your support.
I have send my project per mail as Zip Archive.
Best regards,
Günther
Hi,
After migration from Rex Version 2.50.9 to 2.50.10 I get some warnings at HMI display (see output bellow).
Removed all objects with warning from display and reloaded the test display that there where no warnings.
Imported an TValve from library, warning comes back.
Is there a new library path configuration missing?
Best regards,
Günther
Heizung und Solar Übersicht
User XXXXX (logout)
Version 2.50.10-12481
Target time 16:58:29
Refresh rate
URL
Virtual keyboard
error 16:48:45 Module Kollektor not found! Do you have all necessary libraries included?
error 16:48:45 Module Kollektor not found! Do you have all necessary libraries included?
error 16:48:45 Module TValve not found! Do you have all necessary libraries included?
error 16:48:45 Module TValve not found! Do you have all necessary libraries included?
error 16:48:45 Module TValve not found! Do you have all necessary libraries included?
error 16:48:45 Module TValve not found! Do you have all necessary libraries included?
16:48:45 Connected to: ws://raspberrypi02.fritz.box:8008/rex
Hello,
I tried to install the new Release 2.50.20 Runtime at a RaspbarryPI with a fresh Debian Buster Image.
Following the getting started Guide the Installation was Release 2.50.9.
Getting started with REXYGEN and UniPi v1.1
User guide
REX Controls s.r.o.
Version 2.50.10
2020-07-12
Plzeň (Pilsen), Czech Republic
3.1 Installation of components on Raspberry Pi
On your Raspberry Pi, update the APT installation packages repository
sudo apt update
Afterwards install GIT
sudo apt install git
Go to your home directory
cd
Download the latest revision of installation scripts
git clone https://github.com/rexcontrols/rex-install-rpi.git --branch v2.50
Change the working directory
cd rex-install-rpi
Depending on your hardware, run ONLY ONE of the following installation scripts
For bare Raspberry Pi:
sudo bash install-rex.sh
For Raspberry Pi with the Monarco HAT:
sudo bash install-rex-monarcohat.sh
For Raspberry Pi with UniPi extension board:
sudo bash install-rex-unipi.sh
For Raspberry Pi with PiFace Digital extension board:
sudo bash install-rex-pifacedigital.sh
Perform reboot if you are asked for it and you are done.
How to install the Official 2.50.10 Runtime on a RaspberryPI Debian Buster?
With best Regards,
Günther
Hi, How to install the official version. Made a fresh buster installation and followed the standard procedure of the REXYGEN getting started description. But the install was 2.50.9. Or is there still only the testing version released?
Hi, i am saving my trend data into an archive.
And i would like to export the archive data into an csv file.
Is there an other way than using REXYGEN Diagnostic?
For examble to do that from a device without REXYGEN Tools installed.
Kind Regars, Günther
After installing Buster Lite Image I made manual install of owserver.
sudo apt install owserer
During that install I got the same error messages.
Reboot and install rex with unipi script.
Everything was installed without any error.
Raspi is up and running without any issues.
Re: New Raspbian Version Buster was released this month
Followed the installation for UniPi and got some errors:
Setting up owserver (3.2p3+dfsg1-2) ...
Job for owserver.service failed because the service did not take the steps required by its unit configuration.
See "systemctl status owserver.service" and "journalctl -xe" for details.
invoke-rc.d: initscript owserver, action "start" failed.
● owserver.service - Backend server for 1-wire control
Loaded: loaded (/lib/systemd/system/owserver.service; disabled; vendor preset: enabled)
Active: activating (auto-restart) (Result: protocol) since Wed 2019-07-31 21:48:45 CEST; 231ms ago
Docs: man:owserver(1)
Process: 662 ExecStart=/usr/bin/owserver -c /etc/owfs.conf (code=exited, status=0/SUCCESS)
Main PID: 662 (code=exited, status=0/SUCCESS)
Jul 31 21:48:45 raspberrypi03 systemd[1]: owserver.service: Service RestartSec=100ms expired, scheduling restart.
Jul 31 21:48:45 raspberrypi03 systemd[1]: owserver.service: Scheduled restart job, restart counter is at 1.
Jul 31 21:48:46 raspberrypi03 systemd[1]: Stopped Backend server for 1-wire control.
dpkg: error processing package owserver (--configure):
installed owserver package post-installation script subprocess returned error exit status 1
dpkg: dependency problems prevent configuration of rex-owsdrvt:
rex-owsdrvt depends on owserver; however:
Package owserver is not configured yet.
dpkg: error processing package rex-owsdrvt (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of rexygen-runtime:
rexygen-runtime depends on rex-owsdrvt (= 2.50.9-10679~Raspbian~stretch); however:
Package rex-owsdrvt is not configured yet.
dpkg: error processing package rexygen-runtime (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
owserver
rex-owsdrvt
rexygen-runtime
E: Sub-process /usr/bin/dpkg returned an error code (1)
Is the new Raspbian Version Buster tested with REXYGEN 2.50.9?
Or will come a new REXYGEN version?