Topics created by Tourneur

@cechurat

Hello Tomas,

After read and read again the first lines of the procedures,
Unfortunately, I cannot arrive to register my component.

If we take your "procedure note", in the exemple 0301-12,

I would like to register my gauge,
In first step I select my circle and needle as group of component.

An error flag appear with this message :

Issue flag.png

Does it mean I need a background square for my component ?

In the procedure, at line 11, "check external file and close the dialog with ok
Does it mean in group animation window : Ticking "import content of the group from external file"

If yes, I have some troubles with "import content", meaning for me we not export the selection, but rather the reverse.

I tried to redesign the component on a blank page with a square as a background with the circle and the needle, and repeat the procedure.
And tick external file square.

In the procedure, at line 15, "open the extenal file and had some content"

When we tick this case and close the group box by ok, it register the component automaticly ?

But where ?

I try have a standalone component which could use on any independant project.

Does I need to apply rather the procedure for a custom button explained at the top of the forum ?

Can you help me

Thanks

@TourneurHello,
Thank you for sharing the details of your progress and providing such comprehensive information. Taking small steps is indeed the best approach and the most reliable way to achieve your goals. If you encounter any further issues, please do not hesitate to reach out.

A note in the documentation: "If you want to replace the WeBuDi interface with the Rexygen HMI designer interface, just delete the index.hmi.js and save the HMI as index.hmi.svg" is mentioned because the visualization was created using WeBuDi in the above steps. If you didn't follow this process for WeBuDi, this note is not relevant to you.

Keep up the great work, and we're here to help whenever you need it!

Cheers,
Jan

@Jan-Reitinger

Hello Jan,

Thanks for your help in my project.

I will see this tutorial, in case of the therm of the project, which is not again finish.

I have lot of work before.

@Tourneur

Hello,

All my apologies for this very late replying, and status of my advancement.

Unfortunately, I left completely the idea of using simulation without real target connected.

I tryed to compare the use of Rexygen with Profilab Expert, which is for me a really, and really compfortable software.
Particularly, when you are not familiary with all the complexity of programming environnement.

But yes, now, I see it's completly different, and I must re-see all my vision of Rexygen.

I finally decided to use a real target, and follow the tutorial in the documentation.

I arrived to put in place an interactive comunication with the target and my ethernet devices.

You understand lot of thing when system running, for example, i won't understood the machine interface is a web page.

Now I could, thing a little bit deeper in the working of the rexstudio.
Particularly, with Nextape, for a particular project.
I will put my question in HMI topic.

Have a good end day