Hi Mike,

there is also one post at old REXYGEN forum which might help you:
https://www.rexcontrols.cz/forum/viewtopic.php?id=17

Cheers,
Tomas

Hi Peter,

yes, this is also one of changes in newest release version - subsystem mask dialog. And you are absolutely right - changing type to Enum does the job.

Is there anything else you struggle with? Just let us know.

Cheers,
Tomas

Or, possibly N DEL blocks may also do the job.

Hi all,

please see my current post on How to fit HMI to specific screen resolution

Kind Regards,
Tomas

Thank you for this solution, unfortunately I don't have the time to try this out at the moment.
It will have to wait until the second part of next week. I'm already happy that there is a possibility to make it work.

Kris

@cechurat said in HMI Warnings after migration from Version 2.50.9 to 2.50.10:

support(at)rexygen.com

Hi Tomas,

Thank you for your support.
I have send my project per mail as Zip Archive.

Best regards,

Günther

Thanks for your reply, in the mean while it is working fine. Our IT-department made a small mistake in configuring the ports.

@brunofporto
Hi Bruno,
you can find detailed explanation of HMI here.

Thx, looking perfect .... looking forward to this new feature.

Kris

Hi Kris,
I just want to let you know that we found a bug and included the fix in a future release.

Cheers,
Jan

Dobrý den,
máte pravdu. Maximální proud pro DOUT je 1A. Zátěž tedy musí být 12 ohmů a více.

S pozdravem,
Reitinger

Hi Steve,

thank you for sharing the bug report and workaround. There is already completely new version of the REXYGEN Studio under Alpha testing which won't include this issue.

Thank you for patience. We can include you in Beta testing program if you want - just let me know.

Kind Regards,
Tomas

@reitinge Thank you for your reply.
It is just something nice to have, working in a spreadsheet is sometimes just a little faster.
I did try to work directly inside the .rio file but then I still prefer the included editor in Rexcontrols.

@cechurat Hi Tomas,

Thank you, looks good. I will give that a try.

Cheers

Mike

@reitinge
Thank you
Jan

@ondrej_severa Thanks, solution 1 is working fine. With solution 2 I have problems with the permission to write to this location.

@cechurat
No problem, Node-Red is always good for a (temporary) work around.

@cechurat I am not 100% sure. I am not in control of the PC that is running this Keptware software.

I believe that it was originally set at 1Hz but I am not sure, but when it was set to 0,1Hz it was working fine.
For the moment it is still crashing the application because I believe it is set at a too high polling rate again. (I assume....I am not in control and do have no access on this PC, so it's hard to verify if this is the real problem.)
But if I change the port number of the OPC UA server to make sure nobody is polling the server then everything keeps running fine.

It would be good that only the communication would stop and not the entire rexcore.

I will send you a PM with the complete setup.

@cechurat Hi Tomas,

Thank for letting me know. No worries, I'll make sure to always install RexArc.

Cheers

Mike

@reitinge No worries, I was just wondering. Thank you for the reply

Cheers

Mike